Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13700933
| No.13700933
- Product Categories
- Friendly Links
| Information Name: | Hebei high-pressure micro-mist humidifier Notes |
| Published: | 2015-04-17 |
| Validity: | 365 |
| Specifications: | |
| Quantity: | 1.00 |
| Price Description: | |
| Detailed Product Description: | The following is a high-pressure micro-mist humidifier [] Use Caution: 1, all lines of the entire system can not use ordinary steel rust easily, high pressure seamless copper tube, high pressure seamless steel tube or high-pressure rubber steel composite pipe, avoid rust water clogged nozzles. 2, can be directly connected to the water pipe, but it must be added the super filter, solid particles in the water to avoid clogging the nozzle. 3, if the machine is used in cold regions, should pay attention to take freezing measures; host installation in outdoor, rain measures must be taken; after use, cut off the water, working five seconds, drain the remaining water from the pump to prevent freezing high-pressure pump. 4, is strictly prohibited under anhydrous state, running pumps. 5, the mounting height of the nozzle, it is recommended at least three meters from the ground level, at least 0.5 meters from the top of the house; the one hand, in order to increase the ultra-fine mist particles in the air, and vaporized the time, on the other hand to avoid the ultra-fine mist spray granulation the obstacles arising from water droplets. 6, nozzle angle to the horizontal mounting height 5∽15 ° upward tilt angles for optimal use. 7, each line connecting the nozzle gap 100M 300MM, 2M each have a fixed point; connection line to avoid long-term use, bending, leading to long-term retention of residual water in the pipeline to form a precipitate, plug the nozzle. 8, before the boot, please no pressure regulating valve to release the state, slowly adjust pressure regulator boot, observe pressure gauges to display. 9, before the first operation of the high pressure pump is added to the crankcase lubricating oil, the oil level is added to the foot two horizontal lines in the middle position. Never shall fill; the first 50 hours of high-pressure pump oil change, later replaced every 300 hours. Lubricants using 40 or 60 numbers. At present, our products have been used in textiles, electronics, printing, food, chemical, plastics, tobacco, leather, landscape spray, agriculture, animal husbandry and aquaculture, laboratories, hospitals, temperature and humidity workshops and other industries. We will continue efforts to innovation, to create "gold mine" of international and domestic brands. Contact: Miss Ding Mobile: 18925402588 Website: http: //www.dg-jinlei.com |
Admin>>>
You are the 7381 visitor
Copyright © GuangDong ICP No. 10089450, Ray Industrial Co., Ltd., Dongguan City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 7381 visitor
Copyright © GuangDong ICP No. 10089450, Ray Industrial Co., Ltd., Dongguan City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility

